Railway Fence Variations
Posted by: suzaniscraft on: February 18, 2012
These three quilts show how you can sew 3 strips of fabric together, cut into 6 1/2 inch blocks and create a variety of different patchwork designs. The 2 peach coloured quilts were made from furnishing fabrics bought at a garage sale and the pink quilt the fabric is a polyester fabric.
Cheers
Suzanne
www.craftgate.com.au
http://suzaniscraft.wordpress.com/
http://craftingblogger.blogspot.com.au/
Sampler Quilt; Railway Fence
Posted by: suzaniscraft on: February 11, 2012
Sampler Quilt Block
1: Rail Fence. This is a great block to start the sampler with and your patchwork journey if you are a beginner. The skills you will learn thru this block are the cutting of fabric with a rotary cutter and ruler, sewing ¼ inch seams, matching up a seam and sewing 3 rows of fabric together. To support the instructions l have included photos.
But do remember any question you may want to ask please go to the Craft Gate yahoo group. There you will meet other Block Of The Month participants and l will be visiting regularly http://groups.yahoo.com/group/craftgate/ Don’t forget a vast array of your patchwork and craft equipment needs can be purchased online thru the Craft Gate website; www.craftgate.com.au Craft Gate proudly supports the TV show Suzan Is Craft which is seen on Channel 31 thru out Melbourne, Sydney from 4th March and shortly Adelaide and Brisbane. For write ups re the TV show and guests interviewed do visit the blogs http://suzaniscraft.wordpress.com/ and http://craftingblogger.blogspot.com.au/
Step 1. By now many of you will have gathered your fabric, here are photos of my fabric choices. The floral fabric in the first photo is my main fabric with the next photo showing the support fabrics and the final photo is of my plain background fabric.
Step 2. This involves cutting your fabric so the equipment needed is the cutting board, rotary cutter and Perspex ruler. Choose the 3 fabrics you wish to work with for this block, iron and fold into 4 lengthwise. Place the fabric onto the cutting board, lining up the fold of the fabric with one of the horizontal gridlines on the cutting board. Place the perspex ruler towards the edge of the fabric, again lining one of the horizontal lines on the ruler with the fold of the fabric.
At this point using the rotary cutter and cutting away from you trim off the uneven fabric edge (photo 3 and photo 4) Now to cut your strip of fabric turn the cutting board around, so that the trimmed edge is facing your left side. Refer to the following photo. Now place your ruler 2 1/2 inches in from the edge of the fabric. With the fingers of your left hand hold the ruler in place (ENSURE YOUR FINGERS ARE WELL AWAY FROM THE EDGE OF THE RULER) and holding the rotary cutter in your right hand and at a 45 degree angle run the flatter side of the cutting blade along the side of the ruler travelling away from you. This results in the fabric being cut. Always close your blade once finished cutting due to the sharpness of the blade. Cut another two strips of the same measurement, one each from the other two fabrics. If you are left handed cut the opposite way around.
Step 3. This step involves sewing the 3 strips of fabric together. As in many patchwork designs the seams for this block are ¼ inch, straight stitch and with cotton thread. When sewing strips together sew down one way and then back up the other way. If all strips are sewn together in the same direction an arch will form thus creating an impossible piece to use. The piece needs to be ironed at this stage, as in many patchwork pieces iron the seams together and in one direction. If you have a strip of light coloured fabric always iron the seams towards the darker coloured fabric. Step 4. Place the ironed strip on your cutting board and with your ruler trim off one end. Then measure in 6 1/2 inches with your Perspex ruler and cut with the rotary cutter. We need 4 of these blocks.
Step 5. Sew the two sets of the blocks together, as per photo, using a ¼ inch seam.
Step 6. Sew the two sets of blocks together. In this step the centre seams need to be matched with seams on top blocks going in one direction and the centre seam on the bottom blocks going in the other direction. Thus avoiding bulk forming and being noticeable in the finished project. The finished block will measure 12.5 inches x 12.5 inches.
Cheers Suzanne
http://craftingblogger.blogspot.com.au/
Sampler Quilt; Block Of The Month; Material Requirements
Posted by: suzaniscraft on: February 4, 2012
Patchwork Sampler.
Before you begin.
Over the next few pages we will look at some of the equipment you may need to commence your patchwork journey. There are some basic equipment needs that are musts while others you can add to as you progress.
1/ Sewing Machine: A basic sewing machine is all on needs if you decide to machine sew your quilts. The major requirement of your machine is that it does straight stitch. It would also be helpful when you come to quilt your quilt that the machine can accomadate a walking foot or alternatively can drop the feed dogs and utilize a darning foot.
To view needles for your sewing machine click on the following link http://www.craftgate.com.au/products/Packet-of-Assorted-Universal-Machine-Needles.html
2/ Thread: Many quilters prefer to use a good quality cotton thread in the sewing machine and for the hand quilting process. Thou a good quality polyester-cotton thread can also be utilized. The colour of the thread used is important, try to match the thread colour to the fabric colour. If using a variety of coloured fabrics match the darkest colour fabric with your thread. To view thread range please click on the following link http://www.craftgate.com.au/categories/Threads/Gutermann-Threads/
3/Pins: These will assist in holding the various pieces of fabric together until machine sewn. It is fine to use smaller, fine pins for this process and the longer Quilting pins when pinning the 3 layers, quilt top & wadding & backing, together. To view our range of pins please click on the following link http://www.craftgate.com.au/categories/Haberdashery/Needles-and-Pins/
4/Rotary Cutters: Rotary Cutters make cutting your fabric, especially when cutting multiple layers, a lot easier and very accurate. There are a variety of cutters on the market and it really is a case of trying the different ones available i.e if possible try out your fellow patchworkers, cutters before buying a expensive one. Besides a wide range of styles there is also a variety of sizes, 45mm is the most utilized size. When using a rotary cutter a Quilters Ruler should always be utilized as well. The depth of the quilters ruler ensures the rotary cutter is less likely to stray and cut fingers. To view our range of rotary cutters please click on the following link http://www.craftgate.com.au/categories/Scissors-And-Rotary-Cutters/
5/ Cutting Mats: These mats are specially designed to be used with the rotary cutter. They are often referred to as self healing in that if marked by the rotary cutter the mark will disappear. Don’t use other types of cutting tools on this mat as they will permantly mark these mats. Also never leave your mat in a hot car as once these mats buckle it can never be reversed thus rendering the mat useless. A good sized cutting mat to start off with is 23in x 17in.
6/Quilters Rulers: A quilters ruler is made of, usually, clear acrylic. This allows the user to see the fabric to be cut clearly and thus cut straight lines everytime. As there are many diff sized rulers available a good size to start with is 14in x 4 1/2in. The markings on the ruler should include 1/4in markings and 45 and 60 degree angle markings.
6/ Scissors: A good pair of fabric cutting with sharp points and another pair for cutting paper. To view our range of scissors please click on the following link http://www.craftgate.com.au/categories/Scissors-And-Rotary-Cutters/
7/Fabric: Many quilters utilize 100% cotton for their projects due to its softness, tightness of weave thus not a fabric that distorts its shape easily and the straightness of the grain due to its tighter weave.
Preparation Of Fabric: Many quilters prefer to pre wash their fabric prior to use as this pre shrinks the fabric and rids the fabric of any loose dye.
Selecting Fabric: When choosing fabric for a sampler quilt l tend to choose my main fabric first. The main fabric is usually a busy print. From this fabric l will identify approx 3 colours within the design and choose fabrics of a less busy nature of those 3 colours. These three colours/fabrics become your support colours. The final fabric to choose is your background colour, this colour is pale, of one tone or a tone on tone. This fabric recedes into the background when viewing the completed quilt.
Fabric Amounts: This is a rough estimate only for a lap quilt i.e. 12 blocks, 12inchs x 12 inches. Main Fabric and Background Fabric each 1 1/2 yards or 140cms, Support Fabrics x 4, 4 fat quarters.
http://groups.yahoo.com/group/craftgate/
http://suzaniscraft.wordpress.com/
http://craftingblogger.blogspot.com.au/
Product Review: Vilesofix
Posted by: suzaniscraft on: January 28, 2012
Vilesofix allows the patchworker and crafts person to fuse fabrics together, such in the case of adding appliques to your projects. Some of the uses include adding motifs to clothing such as shirts, jeans and jackets or when wanting to add motifs to quilts, wallhangings, blankets or tablecloths and bedlinen.
A iron set at a low temperature will in most cases ensure the adhering of the motif to the backing fabric. Thou if in doubt or the backing fabric is of a delicate nature do a test on another piece of fabric first to ensure the best results.
Vilesofix is a fine webbed bonding material with a paper backing on one side.
Its on this paper backing that you can draw or trace your desired motif. You can use a soft lead pencil to draw your motif. A outline of the motif is all that is necessay. Cut out your motif approx 1/4″ away from the pencil outline. Iron the cut out paper motif, with webbing side facing the wrong side of the motif fabric, onto the fabric, Now cut out the motif along the pencil line.
The next step is to peel off the paper backing from the motif and place your cut out motif, with the adhering webbing face down, onto the right side of the backing fabric. With your iron set at the desired temperature iron the motif in place. The heat from your iron will melt the webbed bonding material and thus adhere your motif to the backing fabric.
At this stage a precaution needs to be taken as the webbed bonding material once melted is very hard to remove from your ironing board or iron if it should accidently touch either surfaces. Thus you might like to consider utilizing a Applique Mat underneath your work and non gresed baking paper between the motif and the iron.
Click on the following link to view Applique Mats http://www.craftgate.com.au/products/Applique-Sheet.html
Once your piece of work has cooled you can now add embellishment to the area. It should be noted that thou your motif has been secured into place with the Vilesofix if this item is going to be subjected to ongoing wear and tear extra anchoring stitches are needed to ensure the motif stays anchored.
It is always advisable to buy the exact amount you need for each project. Vilesofix does not store well over long periods of time as the air tends to cause the wedded bonding material to separate from the backing paper. Once this occurs it is very hard or almost impossible to utilize with satisfactory results. If you do need to store Vilesofix at anytime it is best stored in an airtight bag.
When buying Vilesofix you need to buy “fresh” Vilesofix. Therefor you are looking for Vilesofix that has not separated from its paper backing prior to you purchashing it.
To view Vilesofix on the Craft Gate website plese click on the following link http://www.craftgate.com.au/products/Vliesofix%3A-Widith-30cm..html
Cheers Suzanne
A Thought
Posted by: suzaniscraft on: January 27, 2012
BOM
Posted by: suzaniscraft on: January 26, 2012
For those who may be contemplating joining us for the BOM series thru out 2012 here is a sampler quilt l constructed a couple of years ago There are a few close up shots of two of the individual blocks. The blocks prior to having the boarders added were approx 12″ or 30cm in size. In this quilt l utilize sample pieces of furnishing fabric and sheeting fabric for the boarders/shashings. I didnt wash the fabric prior to use so consequently after the first wash the fabric did shrink a small amount thus giving the quilt a very ruffled/rippled appearance which l quiet like. The first block and associated start up information will be published the second week of February so l do hope you will join us each month for a different BOM.
Cheers
Suzanne
www.craftgate.com.au
http://craftingblogger.blogspot.com/
http://groups.yahoo.com/group/craftgate/
Making Fabric Postcards
Posted by: suzaniscraft on: January 22, 2012
Today l sat for a few hours and made some fabric cards, see pics in the file section.They were such an easy project to complete and a great way to use up some special scraps of fabric. These scraps of fabric were from fabrics l had bought in London at a Craft expo held at the Alexandra Palace in 2007 and some Laura Ashley piecs l had bought in London. First l ironed my backing fabric onto a very heavy vilene, then arranged my pieces of fabric ontop of the backing fabric. Then over this top layer l placed a piece of netting or sheer chiffon and with a contrasting thread free motioned machined over the piece of work. The next step involved cutting the piece to a postcard size and ironing onto the back a piece of calico. The calico adhered to the backing as l had pre ironed some Vliseofix to it. The hot iron ensured the Calico fabric with the Vliesofix layer would adhere to the back of the postcard.
The final step involves running a close wide satin stitch around the edge of the card.
Now you have a card that can be sent thru the mail or kept as a memento of a special time.
To the product Vliesofix click on the following link;
http://www.craftgate.com.au/products/Vliesofix%3A-Widith-30cm..html
CheersSuzanne
http://craftingblogger.blogspot.com/
BOM Commencing In February
Posted by: suzaniscraft on: January 18, 2012
Commencing the second week in February will be the Craft Gate Block Of The Month. This year long project will introduce the beginner patchworker to the basics of patchwork. In the first month l will also include some general information re patchwork i.e. fabrics and equipment needed. More news re the sampler over the next few weeks.
Cheers
Suzanne
Talking About Wash Away Plastic
Posted by: suzaniscraft on: January 13, 2012
Heres a project that lve had on the go for awhile, a great way to utilize some of those smaller pieces of vibrant fabrics one doesnt want to throw away . The blue piece, above, is the finished result.
The above green piece is a work in progress.
Step 1. Chose a backing fabric, in this case lve chosen calico and stiffen it with a lightweight iron vilene.
Step 2. Collect your fabric pieces, in a particular colour theme. Lots of different textures evident here.
Step 3. Arrange your fabric pieces in a pleasing manner ontop of the backing fabric, within a A4 size.
Step 4. Cover with ” Wash Away” Pastic and pin in place.
Step 5. Set your machine for free motion machine embroidery. Embroider your fabric piece, in my pieces l utilized a meandering stitch. A great way to become familiar/pracrice your free motion machine skills.
Step 6. Further embellish with some solid free motion stitch work.
Step 7. Cut your piece of work down to a A4 size
Step 8. Satin stitch around the eges of your project
Congratulations you now have a unique piece of textile work.
Another thought us that you could cut you work down to a postcard size and create your own personalized postcards or Artists Trading Cards.
Product Review: ” Wash Away” Plastic
Posted by: suzaniscraft on: January 13, 2012
Product Review
“Wash Away Plastic”
Water Soluble Embroidery Topping.
Great for use on plush fabrics or when creating your own fabrics.
On A Roll……22.23cm x 4.57m
On A Sheet……69.85 x 91.44cm
“Wash Away”
A water soluble plastic that dissolves when placed in water. It is commonly used when you want to prevent stitches from being buried in plush or heavyweight fabrics when you machine sew. Another use is when the embroider wants to create their own piece of textile fabric. These following steps will explain how to make you own piece of fabric from fabric scraps.
Step 1 Select your scrap fabric, it can be a variety of fabrics from different weights and colours.
Step 2: Place/sandwich the scraps between 2 layers of the “Wash Away” plastic.
Step 3. Secured in place with pins and placed in a hoop ready for free motion machine embroidery.
Step 4. The finished piece, now can be used as an extra embellishment or an actual piece of fabric in one of your quilt designs, after the plastic has been washed away in warm water.
To view pictures regarding the above technique please click or copy and paste in the following link: http://www.craftgate.com.au/pages/How-To-Use%22-Wash-Away%22.html
To order “Wash Away Plastic” click on or copy and paste the following link: http://www.craftgate.com.au/products/Wash-Away-Plastic…1-Sheet.html or http://www.craftgate.com.au/products/Wash-Away-Plastic..On-A-Roll.html
To view our entire range of “Wash Aways” and “Tear Aways” click on or copy and paste the following link; http://www.craftgate.com.au/categories/Haberdashery/%22Wash-Away%22-and-%22Tear-Aways%
suzaniscraft
